Specialized USFD

Your current position:PRODUCTS >> Specialized USFD

CTS-65 Digital Ultrasonic Non-metal Detector

CTS-65 is a specialized non-metal ultrasonic detector. It is designed by up-to-day digital technique and signal-dealing solution as to replace the old type CTS-45.

  • Product Intro
  • Feature
  • Specification
  • Scope

CTS-65 is a specialized non-metal ultrasonic detector. It is designed by up-to-day digital technique and signal-dealing solution as to replace the old type CTS-45. This device can be applied in concrete structures for measuring stakes, strength, defects, and the quality of refractory materials. Some physical properties of wood, plastics, rubber, graphite, carbon fiber, rocks can as well be tested.

  • Availability for the mode " transmission by one and reception by two".
  • Transmission module of super-high power.
  • Real-time display of waves.
  • Port for USB disk of large capacity.
  • Sophisticated software for accurate and fast interpretation over parameters like time of flight, acoustic amplitude, etc. Signals and data of tested waves can be recorded and stored for replay in field.
  • Continuous detection lest any misses or skips of detection so as to avoid misjudgment of flaws.
  • Real-time workout of Depth-Velocity Curve and Depth-Amplitude Curve, offering clear results.
  • Fine design of multi-functional knob by ergonomics, facilitating and accelerating operation.
  • Switch between DC and AC mains. High power Lithium battery with the life longer than 6 hours.
  • Probes and Elevator specific to stakes are available for the measurement of stakes.
  • Multi-functional processing software fully supports Windows platform according to current detection specification. And the detection report can be created automatically.
Bandwidth 10kHz~1MHz ,10~100kHz
Gain 80dB, step of 1dB, error ranges between ± 1.5d within every 10dB
Sampling Intervals 0.05μs,0.1μs,0.2μs,0.4μs,0.8μs,1.6μs,3.2μs,6.4μsOptional
Time Interpretation Accuracy 0.1μs
Time Interpretation Accuracy 0.1~199999.9μs
Transmission Voltage 200、500、1000V
Channels One for transmission, two for reception
Reception Sensitivity ≤30μV(Signal-to-noise ratio: 3:1)
Noise Level Less than 20% of the Screen’s height
Interpretation Mode Automatic; manual with cursor
Zeroing 1~10μs
Delay for Scanning 0~4000μs
Scanning Range 25~6400μs
Pulse Repetition Frequency 25、50、100Hz three gears
Penetration Distance No less than 10 meters using probe of 12.5kHz on #300 non-flaw concrete(connected to preamplifier)
Display 6.5" TFT,Resolution 640x480
Power Large-capacity Lithium battery without memory effect.Battery life: more than 6 hours without intervals.
220V AC Mains (coupled with adapter)