Digital USFD

Your current position:PRODUCTS >> Digital USFD

CTS-1002 Ultrasonic Flaw Detector

The CTS-1002 is a light-weight instrument with excellent performance which accumulates the experiences of 50 years for making ultrasonic instruments. This instrument is EN12668-1:2010 compliance and has an industrial-leveled TFT display with full WVGA(800×480) resolution providing superior visibility in all lighting conditions, including direct sunshine.

  • Product Intro
  • Feature
  • Specification
  • Scope

The CTS-1002 is a light-weight instrument with excellent performance which accumulates the experiences of 50 years for making ultrasonic instruments. This instrument is EN12668-1:2010 compliance and has an industrial-leveled TFT display with full WVGA(800×480) resolution providing superior visibility in all lighting conditions, including direct sunshine.

 

Weighing only 0.9kg, square wave excitation, full WVGA resolution TFT display and strong flaw detecting capabilities make it superior when compared with other similar products.

  • Advanced circuitry, 640MHz sampling frequency and 800×480 full WVGA resolution assure quick and accurate display and analysis on defect signals even when the signals are weak.
  • Using the advanced tunable square wave excitation technology, the CTS-1002 provides excellent penetration and high signal-to-noise ratio when detecting special composite materials, highly-attenuated or thick work-pieces.
  • 4.3 inches display, set-in battery and charger, but only 0.9kg in weight which make it easy to operate and carry along.
  • The design meets the standard of IP54 certification and compatible with EN 12668:2000 standard.
  • With full WVGA TFT display at industrial level, this instrument offers fine images at different angles.
  • Optimized panel, user-friendly design for the menu, easy and fast to operate no matter you use the left hand or right hand. Various input modes, English/Chinese menu optional.
  • Auto-calibration function including fast calibrating material velocity, probe delay and probe angle.
  • Zoom function for in-gate waveform enables users to observe the waveform detail conveniently. Zoom function for waveform display area and optimized height-to-width rate of the screen ensure echo with higher resolution.
  • DAC: Easy to make, correct, store and recall DAC.
  • Built-in intelligent lithium battery charger. Power supplied by battery or AC mains and it can automatically display the power supply modes. Auto switch between “charge” and “work”.
  • Long battery life of over 8 hours ensures your continuous work.
  • USB port for software updating, data transferring and printing and access to devises such as mouse, keyboard and U-disk.
Attenuator Every 12dB ± 1dB
Equivalent Input Noise <80×10-9 V/√HZ
Transmitter Pulse -Ve Square Wave Pulse,Transmitter Pulse Voltage:25~250V, continuously adjustable with 25V increments
Test Modes Pulse echo and dual transmission
Damping 400,80 Ohm
Frequency Broadband/narrowband optional.Broadband:0.5~20MHz. Narrowband:1.5~3MHz
Gain 0.0~110.0dB.Steps as 0.1/1.0/2.0/6.0dB
Material Velocity 1000~15000m/s continuously adjustable.Set-in 30 common material velocities selectable
Test Range 0.0~10000mm longitudinal wave at steel velocity. Range continuously variable with minimum 0.1mm increments
Rectification Positive halfwave, negative halfwave, full wave
Alarm Real-time alarm signal, positive and negative thresholds, minimum depth, DAC alarm optional
Measuring Mode:Select peak of pulse wave in gate
Display 4.3" industrial-leveled TFT color LCD with 800×480 WVGA resolution
Pulse Shift -7.5~3000μs
Probe Zero 0~999.9μs
Pulse Repetition Frequency 25~800Hz, auto adjustment mode
Vertical Linearity Accuracy ≤3%
Horizontal Linearity Accuracy ≤0.4%
Surplus Sensitivity ≥60dB (200Ф2 flat bottom hole)
Resolutions ≥36dB(5P14)
Dynamic Range ≥32dB
Reject (0~90)%
Electric Noise Level <10%
Interface Q9 transducer cable connectors
USB HOST
Power Supply Large-capacity lithium battery without memory effect; Battery Life: More than 8 hours
Built-in charger, AC Mains 220V
Dust/Splash/Water-proof meets IP54 standard
Standards EN12668-1 compliance
Conform to JB/T 10061-1999 standard
Environmental Temperature -30~50℃
Relative Humidity 20%~95%RH
Weight 0.9Kg (with battery and built-in charger)
Dimension Top:215mm×126mm×53mm
bottom,:215mm×104mm×42mm