SMLS Steel Pipe T-Guage

Your current position:PRODUCTS >> SMLS Steel Pipe T-Guage

SMLS Steel Pipe Anto T-Guage Sys

SMLS Steel Pipe Anto FD & TG system is meant for on-line auto FD systems. It is capable of doing shear wave flaw detection, longitudinal wave flaw detection and wall thickness guaging at the same time. According to different objects and materials, it will adjust work distribution for the each channel and software engagement.

  • Product Intro
  • Feature
  • Specification
  • Scope

SMLS Steel Pipe Anto FD & TG system is meant for on-line auto FD systems. It is capable of doing shear wave flaw detection, longitudinal wave flaw detection and wall thickness guaging at the same time. According to different objects and materials, it will adjust work distribution for the each channel and software engagement.

 

SMLS Steel Pipe Anto FD & TG system is especially applied to detection on large caliber seamless steel pipe of power, nuclear industry, petroleum, metallurgy, automobile, aerospace, boiler, liquid gas transport industry.It is capable of doing shear wave flaw detection, longitudinal wave flaw detection, wall thickness guaging and Lamination defect detection at the same time.

Detection Interface

A-scan Interface

Query & Analysis Interface

Adjustment Interface

Coord Cal Interface

Parameter Calling Interface

Stats Record Interface

  • Unique Interface, bottom-wave gatecatch technology, shortening near-bottom dead-zone.
  • Probe testing status anto-identification, ensuring stable coupling.
  • C-scan TG record created by TG system. easy to survey the thickness shift, capable of TG discerning and self-proofing, effectively eliminating errors.
  • C-Scan Recording on the wave detected, and available with coord-cal, axial-wise cal, cir-wise cal, accurate flaw positioning.
  • File Admins like stats recording, report anto-creating, program saving and calling, detection records saving and calling, etc.
  • Anto-alarming and sparyed-marking.
  • Parameters like gain, range, shift, and gate can be adjusted on each channel independently, or on the module unitarily which is more time-saving.
  • Moving scan from two opposite direction, which is more effort saving and efficiency enhancing.
  • The detecting cart can be turned back for rechecking the flaws if flaws are found during detection, as twice verification.
  • Post- processing and correction if flaws are wrongly identified by each detection module, in avoidance of any interference.
Probe Working Freq. 1~15MHz
Wall TG range 8~200mm
Applicable Pipe Dia 89~1220mm
TG Resolution 0.01mm
Coverage >110%
Task Capacity 180pcs+/h
Channel Distribution Longitudinal Flaw---8 channels (angle probe)
Lateral Flaw---16 channels (angle probe)
TG & Hierarchical Detection---4 channels(normal probe, contact coupling or spraying coupling)