Digital USFD

Your current position:PRODUCTS >> Digital USFD

CTS-1003 Ultrasonic Flaw Detector

The CTS-1003 is a light-weight instrument with excellent performance which accumulates the experiences of 50 years for making ultrasonic instruments. This instrument is EN12668-1:2010 compliance and has an industrial-leveled TFT display with full WVGA(800×480) resolution providing superior visibility in all lighting conditions, including direct sunshine.

  • Product Intro
  • Feature
  • Specification
  • Scope

The CTS-1003 is a light-weight instrument with excellent performance which accumulates the experiences of 50 years for making ultrasonic instruments. This instrument is EN12668-1:2010 compliance and has an industrial-leveled TFT display with full WVGA(800×480) resolution providing superior visibility in all lighting conditions, including direct sunshine.

 

Weighing only 0.9kg, square wave drive, full WVGA resolution TFT display and strong flaw detecting capabilities make it superior when compared with other similar products.

  • Advanced circuitry, 640MHz sampling frequency and 800×480 full WVGA resolution assure quick and accurate display and analysis on defect signals even when the signals are weak.
  • Using the advanced tunable square wave drive technology, the CTS-1003 provides excellent penetration and high signal-to-noise ratio when detecting special composite materials, highly-attenuated or thick work-pieces.
  • 4.3 inches display, set-in battery and charger, but only 0.95kg in weight which make it easy to operate and carry along.
  • The design meets the standard of IP65 standard and can be used in the conditions like rain, dampness and dustiness, as well as reaching the EN 12668:2000 standard.
  • With full WVGA TFT display at industrial level, this instrument offers fine images at different angles.
  • Optimized panel, user-friendly design for the menu, easy and fast to operate no matter you use the left hand or right hand. Various input modes, English/Chinese menu optional.
  • Auto-calibration function including fast calibrating material velocity, probe delay and probe angle.
  • Zoom function for in-gate waveform enables users to observe the waveform detail conveniently. Zoom function for waveform display area and optimized height-to-width rate of the screen ensure echo with higher resolution.
  • DAC: Easy to make, correct, store and recall DAC.
  • Curve Surface Correction: Suitable for detecting both inner and outer curved surface and automatically correct the test result of defect location according to the diameter of the curved surface.
  • Continuous Storage: Continuous video-recording of the waveforms displayed on the screen. The stored video can be reviewed.
  • Built-in intelligent lithium battery charger. Power supplied by battery or AC mains and it can automatically display the power supply modes. Auto switch between “charge” and “work”.
  • Long battery life of over 8 hours ensures your continuous work.
  • USB port for software updating, data transferring and printing and access to devises such as mouse, keyboard and U-disk.
Transmitter Pulse -Negative Square Wave Pulse Transmitter Pulse Voltage:25~250V,continuously adjustable with 25V increments
Test Modes Pulse echo and dual transmission
Damping 400、80Ω
Frequency Broadband/narrowband optional. Broadband: 0.5~20MHz Narrowband: 1.5~3MHz
Gain 0.0~110.0dB. Steps as 0.1/1.0/2.0/6.0dB
Material Velocity 1000~15000m/s continuously adjustable. Set-in 30 common material velocities selectable
Test Range 0.0~10000mm longitudinal wave at steel velocity. Range continuously variable with minimum 0.1mm increments
Rectification Positive halfwave,negative halfwave,full wave,RF
Alarm Real-time alarm signal, positive and negative thresholds, minimum depth, DAC alarm optional
Measuring Mode:Select front edge or peak of pulse wave in gate
Display 4.3" industrial-leveled TFT color LCD with 800×480 WVGA resolution
Pulse Shift -7.5~3000μs
Probe Zero 0~999.9μs
Pulse Repetition Frequency 25~800Hz, auto adjustment mode
Vertical Linearity Accuracy ≤3%
Horizontal Linearity Accuracy ≤0.4%
Surplus Sensitivity ≥60dB(200Ф2 flat bottom hole)
Resolutions ≥36dB(5P14)
Dynamic Range ≥32dB
Reject 0~90%
Electric Noise Level <10%
Interface C9 transducer cable connectors
USB HOST
Power Supply Large-capacity Lithium Battery without memory effect; Battery Batty Life: More than 8 hours
Built-in charger, AC Mains 220V
Dust/Splash/Water-proof In accordance with IP65 standard
Standards EN12668-1 compliance
Conform to JB/T 10061-1999 standard
Environmental Temperature -30~50℃
Relative Humidity 20%~95%RH
Weight 0.95Kg (with battery and built-in charger)
Dimension 246mm×166mm×47mm